What should I do if I’m experiencing issues with the point of impact?
Quick answer
Check the attachment’s installation, the PSP adapter, your rifle’s zeroing, and consider using the display calibration function.
If you’re having issues with the point of impact, follow these steps:
- Attachment Installation: Ensure the attachment is installed correctly and that you’re using the appropriate PSP adapter and insert ring.
- Rifle Zeroing: Confirm that your rifle is properly zeroed.
- Display Calibration: Use the display calibration function to fine-tune performance. Refer to the user manual for detailed instructions.
These checks can help address and resolve point-of-impact issues effectively.
Thermal Imaging Attachments Common Questions
Do I need to zero the Krypton attachment?
Are there multiple zeroing profiles available for using the attachment on different rifles?
Can the Krypton 2 be mounted on a Picatinny rail?
Can the Krypton 2 be used as a handheld monocular?
Can I use the 3x20B monocular without removing the PSP adapter?
Can Pulsar attachments be used with a SCAR 17s rifle known for its strong recoil?
What should I do if my attachment doesn’t hold zero?
Why does my image freeze from time to time? Is it a defect?
Why do I see a ghost image or residual artifacts from the previous image?
I hear a clicking sound during calibration. Can I disable it?
Why is it necessary to calibrate the image on a thermal imager?
Can the attachment be powered with a 12V car adapter?
What should I do about defective pixels on my thermal imaging device screen?
Does the attachment support wireless remote control?
Are user zeroing profiles retained after updating the attachment’s firmware?
Can Pulsar attachments be used with a SCAR 17s rifle known for its strong recoil?
Can I safely use the Krypton 2 on an air or pellet gun?
Do I need permission to travel with my thermal attachment to another country?
What is the purpose of the User Mode on Pulsar thermal imaging devices?
Still have a question?
Feel free to get in touch