Why is my riflescope not measuring distance correctly?
Quick answer
Distance measurement accuracy depends on target reflectivity, environmental conditions, and hand stability. Use a stable surface for long-range measurements to small targets.
If your riflescope is not measuring distance accurately, consider the following factors:
- Target Reflectivity:
Measurement accuracy depends on the reflection ratio of the target surface, which is influenced by:- Texture, color, and shape: Shiny or bright surfaces are typically more reflective than dark or dull ones.
- Target size: Measuring range to small targets is harder than to large ones.
- Environmental Conditions:
Light conditions, fog, haze, rain, snow, or bright sunlight (especially when measuring towards the sun) can impact ranging performance. - Hand Stability:
When targeting objects over 400 meters away, especially small ones, hand tremors can affect accuracy. Rest your elbow on a solid surface to stabilize the device and improve accuracy.
By addressing these factors, you can optimize your riflescope’s distance measurement performance.
Thermal Imaging Riflescopes Common Questions
Do I need permission to travel with my thermal imager to another country?
Why does a semi-circular flare appear at the bottom of the thermal image after a shot?
What makes the Thermion 2 LRF XL50 stand out compared to the Thermion 2 LRF XP50 PRO and Thermion 2 LRF XG50?
Does the scope have an Image Boost feature?
The rangefinding reticle and aiming reticle don’t align. Is that normal?
Can I roll back to a previous firmware version on my device?
Can I use the Thermion 2 riflescope during the daytime?
What is the recommended torque setting for mounting rings when installing the Thermion 2?
Can I replace the internal battery in my device myself?
Does the riflescope have recoil-activated video recording?
Are my zeroing profiles saved when I update my riflescope’s firmware?
How do I mount the Talion riflescope on my rifle?
What mounting rings do you recommend for the Thermion 2 riflescope?
Which Thermion riflescopes support remote control, and how can I use it?
What are the key features of the Talion riflescope?
What are the key differences between the Talion XQ and Talion XG models?
What is the recommended torque setting for installing the Talion riflescope?
My riflescope turns off after a shot. What should I do?
Can I use the Talion riflescope during the daytime?
Why do I see a ghost image or residual artifacts from the previous image?
I hear a clicking sound during calibration. Can I disable it?
My riflescope won’t hold zero. What should I do?
Why is my image blurry or out of focus?
Why does my image freeze from time to time? Is it a defect?
Why is it necessary to calibrate the image on a thermal imager?
What should I do about defective pixels on my thermal imaging device screen?
Can I power my riflescope using a 12V car adapter?
Why is the reticle off-center after zeroing?
Will the riflescope save my zeroing profiles if it’s powered down for an extended period?
My image is blurry when I use digital zoom. Is it a defect?
Can I upload new reticles to my riflescope?
Can I use my Pulsar riflescope on a SCAR 17s rifle, which is known for its recoil?
Can I safely use my Talion riflescope on an air or pellet gun?
What is the purpose of the User Mode on Pulsar thermal imaging devices?
Still have a question?
Feel free to get in touch