My Telos LRF is not measuring distance correctly.
Please take note of the following:
- Accuracy of measurement and maximum range depend on the reflection ratio of the target surface, the angle at which the emitting beam falls on the target surface and environmental conditions. Reflectivity is also affected by surface texture, colour, size and the shape of the target. A shiny or brightly coloured surface is normally more reflective than a dark surface.
- Measuring range to a small sized target is more difficult than to a large target. Accuracy of the measurement can also be affected by light conditions, fog, haze, rain, snow etc. Ranging performance can degrade in bright conditions or when ranging towards the sun.
- When measuring range to a small-sized target located more that 400 meters away, it is recommended that you put your elbow against a solid surface. This is due to possible hand tremors and difficulty hitting the target with the beam at a longer distance.
Thermal Imaging Scopes Common Questions
What are the differences between the Telos LRF and the Helion 2 XP50 Pro?
What is the minimum focusing distance of the Telos XP50?
Is it possible to remove the laser rangefinder from the Telos XP50 LRF?
What type of sensor is used in the Telos LRF XP50?
Why is the Telos upgradeable? What does it mean?
Can I buy electronic components to upgrade my device myself?
Will interchangeable lenses be available for Pulsar Telos XP50 thermal imaging devices?
I can see a ghost image / residual artifacts of the previous image. What is wrong?
How can I activate zoom?
Can the Telos be used with a tripod?
My image is blurry or out of focus.
My Telos LRF is not measuring distance correctly.
What battery does the Telos LRF use, and how can I charge it?
How do I register my Telos LRF?
What is the warranty period for the device?
Is the Telos LRF designed for left-handed use?
I can hear a clicking sound during calibration. Can I turn it off?
Can the Image Detail Boost function be used for a long time? Will it damage the device?
Can I change the magnification in the monocular to 1x?
How can I activate zoom?
What should I do if there are defective pixels or pixel clusters on the screen of my thermal imaging device?
What is the User Mode for?
Why does my image freeze from time to time? Is this a defect?
Why do I see defective pixels or pixel clusters on my thermal imaging device?
What are the differences between the Telos XP50 and Telos XQ35?
Can the Telos LRF XQ35 be used with a tripod?
Why do I see defective pixels or pixel clusters on my thermal imaging device?
What battery does the Telos LRF use, and how can I charge it?
How do I register my Telos LRF?
What is the warranty period for the device?
What should I do if there are defective pixels or pixel clusters on the screen of my thermal imaging device?
Is the Telos LRF designed for left-handed use?
I can hear a clicking sound during calibration. Can I turn it off?
I can see a ghost image / residual artifacts of the previous image. What is wrong?
What is the minimum focusing distance of the Telos XQ35?
Why is image calibration necessary?
Can the laser rangefinder be removed from the Telos LRF XQ35?
What type of sensor does the Telos XQ35 use?
Why is the Telos upgradeable? What does it mean?
Can I buy electronic components to upgrade my device myself?
Will interchangeable lenses be available for Pulsar Telos XP50 thermal imaging devices?
Can I change the magnification in the monocular to 1x?
Why does my image freeze from time to time? Is this a defect?
How can I activate zoom?
Can the Telos LRF XG50 be used with a tripod?
What is the warranty period for the device?
Is the Telos LRF designed for left-handed use?
My image is blurry or out of focus.
What is the User Mode for?
What are the differences between the Telos XP50 and Telos XG50?
Why do I see defective pixels or pixel clusters on my thermal imaging device?
I can hear a clicking sound during calibration. Can I turn it off?
What is the minimum focusing distance of the Telos XG50?
Is it possible to remove the laser rangefinder from the Telos LRF XG?
What type of sensor does the Telos XG50 use?
My Telos LRF is not measuring distance correctly.
What battery does the Telos LRF use, and how can I charge it?
How do I register my Telos LRF?
What should I do if there are defective pixels or pixel clusters on the screen of my thermal imaging device?
Why is image calibration necessary?
Why is the Telos upgradeable? What does it mean?
Can I buy electronic components to upgrade my device myself?
Can I change the magnification in the monocular to 1x?
I can see a ghost image / residual artifacts of the previous image. What is wrong?
I can see a ghost image / residual artifacts of the previous image. What is wrong?
Why does my image freeze from time to time? Is this a defect?
My image is blurry or out of focus.
What is the User Mode for?
What are the differences between the Helion 2 and the Helion 2 XP Pro?
I can hear a clicking sound during calibration. Can I turn it off?
Can I use replaceable Helion lenses with the Helion 2 XP50 Pro?
What type of sensor is used in Helion devices?
Can a Helion device be mounted on a rifle or used as a front attachment?
Can the Image Detail Boost function be used for a long time? Will it damage the device?
My image freezes from time to time. Is this a defect?
What should I do if there are defective pixels or pixel clusters on the screen of my thermal imaging device?
Why is there no heat signature visible on the display, only a uniform background?
Why won’t my device calibrate automatically, leaving a ghost image after auto calibration?
Can I measure the temperature of hot objects using Helion?
Can I charge my Helion using a car lighter?
Are Helion devices adapted for left-hand use?
Can I add a reticle to the Helion?
I can see a ghost image / residual artifacts of the previous image. What is wrong?
I can hear a clicking sound during calibration. Can I turn it off?
Can I use replaceable Helion lenses with the Helion 2 Series?
Do I need permission to travel with my thermal imager to other countries?
My image is blurry or out of focus.
My image freezes from time to time. Is this a defect?
Why is image calibration necessary?
What should I do if there are defective pixels or pixel clusters on the screen of my thermal imaging device?
What type of sensor is used in Helion devices?
Can a Helion device be mounted on a rifle or used as a front attachment?
Can the Image Detail Boost function be used for a long time? Will it damage the device?
The calibration sound in Helion 2 seems louder than in Helion. Can it be made quieter?
Why is there no heat signature visible on the display, only a uniform background?
Why won’t my device calibrate automatically, leaving a ghost image after auto calibration?
Can I measure the temperature of hot objects using Helion?
Can I charge my Helion using a car lighter?
Are Helion devices adapted for left-hand use?
Can I add a reticle to the Helion?
Can I restore a previous firmware version on your devices?
What are the differences between the Axion XQ30 Pro and Axion XM30F?
Why does the Axion XQ30 Pro have a lower detection range compared to the Axion 2 XQ35 Pro?
Can the Axion 2 XQ35 be equipped with a rangefinder?
Does the Axion XQ30 Pro have a laser rangefinder?
Can I change the lens to one with 1x magnification?
Does the unit feature Image Boost?
My image is blurry or out of focus.
How do I switch between color modes?
How do I update the firmware in my Axion?
Can I restore a previous firmware version on your devices?
How do I switch between color palettes?
Can the Axion LRF XQ be mounted on a rifle?
I can see a ghost image / residual artifacts of the previous image. What is wrong?
I can hear a clicking sound during calibration. Can I turn it off?
My image freezes from time to time. Is this a defect?
Why is image calibration necessary?
Why do I see defective pixels or pixel clusters on my thermal imaging device?
What is the User Mode for?
My image freezes from time to time. Is this a defect?
Can I use the Axion monocular with eyeglasses?
How do I switch between color palettes?
How do I switch to the "White Hot" color palette?
The Axio XQ LRF does not have WiFi. How can I update the firmware?
My image is blurry or out of focus.
My image freezes from time to time. Is this a defect?
Why is image calibration necessary?
Why do I see defective pixels or pixel clusters on my thermal imaging device?
Why is my Axion XQ LRF not measuring distance correctly?
Does the rangefinder use a safe laser?
I can see a ghost image / residual artifacts of the previous image. What is wrong?
I can hear a clicking sound during calibration. Can I turn it off?
My image is blurry or out of focus.
My image freezes from time to time. Is this a defect?
Why is image calibration necessary?
What should I do if there are defective pixels or pixel clusters on the screen of my thermal imaging device?
How can I comfortably use the Axion Key with eyeglasses?
Why don’t I see the charge percentage on my Axion Key?
Can the Axion Key be mounted on a rifle?
How do I switch between color modes?
Why does my Axion Key show a driver compatibility error when updating the firmware?
Can the Axion be mounted on a rifle?
I can see a ghost image / residual artifacts of the previous image. What is wrong?
The Axion Key XM30 and Axion XM30 have the same field of view but different base magnifications. Is this correct?
How do I update the firmware on my Axion Key?
How can I tell if the battery is fully charged when using a wall charger?
My image is blurry or out of focus.
Can I use the Axion monocular with eyeglasses?
Can the Axion XQ38 be equipped with a rangefinder?
Can I charge the device battery using a power bank?
Why is image calibration necessary?
What should I do if there are defective pixels or pixel clusters on the screen of my thermal imaging device?
How do I update the firmware on my Axion?
How can I check the battery charge percentage without turning on the device?
My image is blurry or out of focus.
I can hear a clicking sound during calibration. Can I turn it off?
Can I use replaceable Helion lenses with the Helion 2 XP50 Pro?
Why is image calibration necessary?
Still have a question?
Feel free to get in touch