The Wireless Remote Control Pulsar BT is designed to control remotely device’s selected functions and to navigate its menu.
The Remote Control is compatible with the following models: Krypton 1-2, Proton, Forward, Forward S, Thermion 2 LRF, Thermion 2 Pro, Talion, Trail 3, Digex C50.
Specifications
SKU
79142
Frequency
2.4 GHz
Standard
IEEE 802.15.1
Line-of-sight reception range, m
At least 5
Voltage / Battery
3V / CR2032
Dimensions, mm / inch
94x30x28 / 3.7×1.2×1.1
Weight, g / oz
32 / 1.1
Descriptions of controls
Controller (1)
Short press
Enter quick menu
Enter main menu submenu
Confirm selection
Switch to the next submenu option
Long press
Enter main menu
Clockwise rotation
Quick menu: Increase parameter value
Main menu: Navigate upwards
Counter‑clockwise rotation
Quick menu: Decrease parameter value
Main menu: Navigate downwards
Button (2)
Short press
Calibrate the microbolometer
Turn display on *
Long press
Turn display off
Turn device off *
Button (3)
Short press
Turn IR illuminator on
Switch IR illuminator power level
Toggle between observation modes *
Long press
Turn IR illuminator off
Switch between colour palettes *
Button (4)
Short press
Start video recording
Take a photograph
Long press
Switch between photo and video modes
* Button functions may vary depending on the Pulsar model.
For detailed description of the Pulsar BT please refer to the user manuals of the respective devices
Remote control activation
To start operate the remote control, remember to activate it as follows:
Go to the Bluetooth submenu of the Pulsar device.
Press and hold any button on the Remote Control. The Remote Control is visible in the Bluetooth network and can be connected during this time.
Select the Remote Control from the Bluetooth submenu of the Pulsar device.
Once paired, the Remote Control can operate the Pulsar device.
Going forward, the Remote Control will automatically connect to the paired device when within visible range.
Note:Only one Remote Control can be connected to the device at a time.
Supported devices
Device
SKU
Trail 3 LRF XR50
76588
Trail 3 LRF XR50 (with Weaver LQD mount)
76588L
Trail 3 LRF XR50 (with Weaver N mount)
76588W
Trail 3 LRF XR50 (with Weaver SQD mount)
76588WS
Trail 3 LRF XQ50
76585
Trail 3 LRF XQ50 (with Weaver LQD mount)
76585L
Trail 3 LRF XQ50 (with Weaver N mount)
76585W
Trail 3 LRF XQ50 (with Weaver SQD mount)
76585WS
Thermion 2 LRF XP50 Pro
76551
Thermion 2 LRF XQ50 Pro
76555
Thermion 2 LRF XG50
76554
Thermion 2 LRF XL50
76557
Thermion 2 XP50 Pro
76547
Thermion 2 XQ50 Pro
76548
Thermion 2 XQ35 Pro
76541
Thermion Duo DXP50
76571
Thermion Duo DXP55
76572
Talion XG35
76563
Talion XG35 (with Weaver U mount)
76563U
Talion XG35 (with Weaver USQD mount)
76563S
Talion XG35 (with Weaver LQD mount)
76563L
Talion XQ35 Pro
76566
Talion XQ35 Pro (with Weaver U mount)
76566U
Talion XQ35 Pro (with Weaver USQD mount)
76566S
Talion XQ35 Pro (with Weaver LQD mount)
76566L
Talion XQ38
76561
Talion XQ38 (with Weaver U mount)
76561U
Talion XQ38 (with Weaver USQD mount)
76561S
Talion XQ38 (with Weaver LQD mount)
76561L
Krypton 2 FXQ35
76654
Krypton 2 XQ35
77374
Krypton 2 FXG50
76659
Krypton 2 XG50
77379
Krypton FXG50
76655
Krypton XG50
77375
Proton FXQ30
76653
Proton XQ30
77378
Digex C50
76635
Digex C50 (with Pulsar Digex-X850S IR Illuminator)
76635L
Digex C50 (with Pulsar Digex-X940S IR Illuminator)
76635I
Forward F455S
78189
Forward FN455S
78199
Forward F455
78186
Forward FN455
78196
Troubleshooting
The device does not work when pressing the Remote Control buttons or rotating the controller.
Check
The Remote control is not activated
Corrective action
Activate the remote control according to instructions
Check
Low battery
Corrective action
Install a new CR2032 battery as follows: unscrew the screws on the rear cover of the Remote Control, remove the cover, install a new battery, and screw the cover with screws.
Check
The Remote Control is out of range of the device.
Corrective action
Return to the device coverage area.
Check
The Remote Control does not work if the device is turned off.